Performance characteristics of aluminum ash smelting rotary furnace:
The
aluminum ash smelting rotary furnace does not require a heating device
to process hot slag or cold slag. Especially when processing cold slag,
only a bucket of hot slag raked out from the furnace can be continuously
operated and processed. The operation process does not require other
than electricity for the operation of the equipment. Additional energy
consumption, due to centralized processing, the dust generated can be
easily collected. The aluminum ash smelting rotary furnace recycles and
reuses the ash from the smelting furnace. The rotary kiln is used in
factories that process large quantities of slag. After processing, it
can also be put into your cold ash bucket for cooling and sorting. The
sorted ash is fine, medium, coarse, and medium. The fine ash can be
directly processed outside. The ash and coarse ash can be added to the
rotary furnace and used as coolant, which can maximize the recovery of
aluminum from aluminum slag, and the economic benefits are very obvious.
Performance characteristics of aluminum ash smelting rotary furnace:
The aluminum ash smelting rotary furnace does not require a heating device to process hot slag or cold slag. Especially when processing cold slag, only a bucket of hot slag raked out from the furnace can be continuously operated and processed. The operation process does not require other than electricity for the operation of the equipment. Additional energy consumption, due to centralized processing, the dust generated can be easily collected. The aluminum ash smelting rotary furnace recycles and reuses the ash from the smelting furnace. The rotary kiln is used in factories that process large quantities of slag. After processing, it can also be put into your cold ash bucket for cooling and sorting. The sorted ash is fine, medium, coarse, and medium. The fine ash can be directly processed outside. The ash and coarse ash can be added to the rotary furnace and used as coolant, which can maximize the recovery of aluminum from aluminum slag, and the economic benefits are very obvious.
Working principle of aluminum ash smelting rotary furnace:
1.Before use, the aluminum slag tilting rotary furnace is first paved with cold ash. The cold ash used for the bottom is sieved ash granules. The amount added is 3/4 to 1 bucket. If the amount of hot ash is not enough, you can wait for more hot ash to be added.
2. The hot ash sent from each workshop must be put into the furnace in time (except when frying ash or unloading). If it cannot be put into the furnace in time, the hot ash burning on the surface should be scattered and covered with fine ash, and closed with a slag basin cover. Prevent excessive oxidation and reduce heat loss.
3. Install aluminum ash smelting rotary furnace.
3. When loading the aluminum smelting rotary furnace, the total weight of cold ash and hot ash needs to be considered. The ratio of cold ash to hot ash is roughly 2:3. The cold ash generally does not exceed 1.5-3 tons, and the hot ash does not exceed 3-5 tons. The total amount of ash loaded in each furnace shall not exceed 8 tons.
4. When the amount of hot ash is sufficient, you can start working. Use a forklift target to turn on the open flame to heat it evenly.
5. Use the remote control to control the rotation of the multifunctional rotary furnace (it can rotate forward or reverse), and use a target to stir at the same time. Control the temperature not to be too high (when the temperature is too high, add cold ash to cool down)
6. When adding materials to the aluminum slag tilting rotary furnace, the ash hopper must not violently hit the furnace door and furnace wall. The loading time for each hopper is 3-5 minutes.
Features of aluminum ash smelting rotary furnace equipment:
1. High temperature control accuracy;
2. High degree of automation;
3. Low energy consumption, high output and low pollution;
4. Continuous production.
